Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
TRAUB TNL 18
Kategorije
CNC stružnica z dolgim hodom
Objekt
50772
Proizvajalec
TRAUB
Model
TNL 18
Leto
2011
Upravljanje
MITSUBISHI
Objekt
50772
| basic functions | ||
|---|---|---|
| number of spindles: | 2 | |
| number of turrets: | 2 | |
| number of c-axes: | 2 | |
| number of y-axes: | 1 | |
| Working Range Turning | ||
|---|---|---|
| turning diameter (max): | 20 | mm |
| bar diameter (max): | 18 | mm |
| worpiece length max.: | 200 | mm |
| main spindle | ||
|---|---|---|
| spindle revolutions (max): | 12000 | /min |
| spindle diameter: | 20 | mm |
| spindle bore diameter: | 18 | mm |
| c-axis: yes | ||
| counter spindle | ||
|---|---|---|
| spindle revolutions (max): | 12000 | /min |
| c-axis: yes | ||
| X/Z slide | ||
|---|---|---|
| Z-axis travel: | 250 | mm |
| X-axis travel: | 120 | mm |
| Y-axis travel: | 65 | mm |
| number of tool positions (total): | 8 | |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| attachments (turning) | ||
|---|---|---|
| bar feeder: yes | ||
| bar magazine: yes | ||
| chip conveyor: yes | ||
| coolant unit: yes | ||
| band filtration unit: yes | ||
| through spindle coolant attachment: yes | ||
| hydraulic system: yes | ||
| European CE standards: yes | ||
| Parts conveyor for parts removal
- Parts gripper
- Coolant tank with belt filter
- High-pressure pumps approx. 50 bar for external and internal mould cooling
- Additional high-pressure pump up to 140 bar for internal mould cooling
- Bar feeder FMB Minimag 20 with Ø20 channel and Ø16 interchangeable channel
- Chip conveyor (cable drag)
- Kraft & Bauer CO² extinguishing system |
