Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
MIKRON UCP 600 VARIO
Kategorije
Obdelovalni center - univerzalni (APC)
Objekt
43578
Proizvajalec
MIKRON
Model
UCP 600 VARIO
Leto
2005
Upravljanje
HEIDENHAIN ITNC 530
Objekt
43578
| Working Range -cubic- | ||
|---|---|---|
| X-axis travel: | 600 | mm |
| Y-axis travel: | 450 | mm |
| Z-axis travel: | 450 | mm |
| rotating range B-axis from: | -115 | ° |
| rotating range B-axis up to: | 30 | ° |
| rotating range C-axis from: | 0 | ° |
| rotating range C-axis up to: | 360 | ° |
| Table | ||
|---|---|---|
| clamping surface diameter: | 450 | mm |
| workpiece load (max): | 200 | kg |
| spindle / head | ||
|---|---|---|
| spindle revolutions (max): | 20000 | /min |
| tool fixture: HSK A63 | ||
| Tool magazine | ||
|---|---|---|
| number of positions: | 120 | |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| total weight approx.: | 7700 | kg |
| attachments | ||
|---|---|---|
| workpiece sensor: yes | ||
| chip conveyor: yes | ||
| coolant unit: yes | ||
| band filtration unit: yes | ||
| through spindle coolant attachment: yes | ||
| closed cabin: yes | ||
| Equipment: - without workpiece storage |
