Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
DUNKES HD 25-25-125
Kategorije
Transferna stiskalnica - hidravliĊna
Objekt
47903
Proizvajalec
DUNKES
Model
HD 25-25-125
Leto
2001
Upravljanje
SIEMENS
Objekt
47903
| Press Design | ||
|---|---|---|
| drive system: hydraulic | ||
| frame design: H-frame, monoblock | ||
| openings in uprights: yes | ||
| number of suspensions: | 3 | |
| Press forces | ||
|---|---|---|
| total force (nominal): | 175 | to |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 1500 | mm |
| table surface (front-back): | 810 | mm |
| Slide | ||
|---|---|---|
| slide force: | 25 | to |
| table surface (left-right): | 480 | mm |
| table surface (front-back): | 480 | mm |
| stroke: | 300 | mm |
| slide ejector / cushion | ||
|---|---|---|
| stroke: | 100 | mm |
| Die Cushion (table cushion) | ||
|---|---|---|
| cushion force: | 2 | to |
| stroke: | 40 | mm |
| Ejector (table ejector) | ||
|---|---|---|
| nominal force: | 0.2 | to |
| stroke: | 40 | mm |
| Slide | ||
|---|---|---|
| slide force: | 25 | to |
| table surface (left-right): | 480 | mm |
| table surface (front-back): | 480 | mm |
| stroke: | 300 | mm |
| slide ejector / cushion | ||
|---|---|---|
| stroke: | 100 | mm |
| Die Cushion (table cushion) | ||
|---|---|---|
| cushion force: | 10 | to |
| stroke: | 100 | mm |
| Ejector (table ejector) | ||
|---|---|---|
| nominal force: | 0.2 | to |
| stroke: | 40 | mm |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 500 | mm |
| distance between columns (H-frame): | 1550 | mm |
| passline opening (free passage in side columns): | 700 | mm |
| free passage between side columns (height): | 640 | mm |
| Slide | ||
|---|---|---|
| slide force: | 125 | to |
| table surface (left-right): | 480 | mm |
| table surface (front-back): | 480 | mm |
| stroke: | 300 | mm |
| slide ejector / cushion | ||
|---|---|---|
| stroke: | 100 | mm |
| Die Cushion (table cushion) | ||
|---|---|---|
| cushion force: | 2 | to |
| stroke: | 40 | mm |
| Ejector (table ejector) | ||
|---|---|---|
| nominal force: | 0.2 | to |
| Transfer System | ||
|---|---|---|
| number of tool stations: | 3 | |
| distance between tools, stroke X max.: | 500 | mm |
| distance between tools, stroke X min.: | 0 | mm |
| stroke Y max.: | 80 | mm |
| stroke Y min.: | 0 | mm |
| stroke Z max.: | 30 | mm |
| stroke Z min.: | 0 | mm |
| distance press table - transfer rail min.: | 168.5 | mm |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 120 | kW |
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Attachments (presses) | ||
|---|---|---|
| gripper transfer system: yes | ||
| Hydraulic 3-slide press with transfer device Defects: Crack in the upright, without affecting the current application, monitored by press force monitoring system |
