Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
PLATARG 912
Kategorije
Transferna stiskalnica - mehanska
Objekt
43817
Proizvajalec
PLATARG
Model
912
Leto
1968
Objekt
43817
| Press Design | ||
|---|---|---|
| drive system: eccentric / crank | ||
| number of suspensions: | 12 | |
| Press forces | ||
|---|---|---|
| total force (nominal): | 45 | to |
| Slide | ||
|---|---|---|
| stroke: | 165 | mm |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 3658 | mm |
| space requirements -front/back-: | 1829 | mm |
| total height: | 3200 | mm |
| total weight approx.: | 20000 | kg |
| Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top Shaft * Bijur Oiler Pump - Chain Drive, feeding all moving surfaces * Counter Balance pneumatic cylinders on top * Platarg 6" wide chopper - Bottom Shaft driven with cam * Platarg Air Clutch & Brake - Like Minster set up * Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels. * Tie Rod frame construction - rods on each side of top shaft * Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall. * Press is on shop floor under power and can be inspected. Good working older Platarg. * New 1968. Seller bought it new from Factory. |
