Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
SCHULER GRÄBENER GMO 2-315-2000-160
Kategorije
Progressive Die Press -mechanical-
Objekt
44872
Proizvajalec
SCHULER GRÄBENER
Model
GMO 2-315-2000-160
Leto
2003
Upravljanje
SIEMENS S7
Objekt
44872
| Press Design | ||
|---|---|---|
| drive system: knuckle-joint | ||
| frame design: H-frame, monoblock | ||
| openings in uprights: yes | ||
| number of suspensions: | 2 | |
| feedstock transport direction: left to right | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 315 | to |
| nominal work capacity: | 38 | kNm |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 2000 | mm |
| table surface (front-back): | 1200 | mm |
| thickness of bolster plate: | 200 | mm |
| Slide | ||
|---|---|---|
| slide force: | 315 | to |
| table surface (left-right): | 1995 | mm |
| table surface (front-back): | 1100 | mm |
| stroke: | 160 | mm |
| stroke rate (max.): | 80 | /min |
| slide (mechan. Press) | ||
|---|---|---|
| slide adjustment: | 140 | mm |
| stroke rate (min.): | 20 | /min |
| stroke rate (max.): | 80 | /min |
| main drive power: | 90 | kW |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 555 | mm |
| distance between columns (H-frame): | 2060 | mm |
| passline opening (free passage in side columns): | 1060 | mm |
| Overall Specifications (coil lines) | ||
|---|---|---|
| Sirina traku maks.: | 400 | mm |
| sheet thickness max.: | 5 | mm |
| Coil Chair | ||
|---|---|---|
| coil weight max.: | 4 | to |
| Decoiler | ||
|---|---|---|
| design: single reel, traversable | ||
| Sirina traku maks.: | 400 | mm |
| sheet width (min): | 30 | mm |
| coil weight max.: | 4 | to |
| max. diameter of coil: | 1500 | mm |
| mandrel expansion range from: | 460 | mm |
| mandrel expansion range up to: | 530 | mm |
| movement: | 1500 | mm |
| Leveller Unit | ||
|---|---|---|
| Sirina traku maks.: | 400 | mm |
| sheet width (min): | 50 | mm |
| material cross section max. (450 N/mm2): | 1000 | mm² |
| number of leveller rolls: | 9 | |
| diameter of leveller rolls: | 50 | mm |
| number of infeed-/outfeed rolls: | 150 | |
| feed velocity min.: | 5 | m/min |
| feed velocity max.: | 50 | m/min |
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| Sirina traku maks.: | 400 | mm |
| sheet thickness max.: | 5 | mm |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| total weight approx.: | 45000 | kg |
| Attachments (presses) | ||
|---|---|---|
| decoiler: yes | ||
| leveller unit: yes | ||
| strip feeder: yes | ||
| Coil Reel KOHLER 4000.1
Straightener KOHLER KRM 50.400/9
KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles |